Posted inNAS Q&A PDM(Power Data Manager)

Set Up ITE2 NAS Static IP in PDM

What do you need to set up static IP?

Please try to think on one situation, if you always log in to your ITE2 NAS by IP address 192.168.0.XX.

Somehow in someday, you cannot connect to your NAS by IP address anymore, but ITE2 NAS works fine like usual, what is happening?

It may cause by the reason for the network device doesn’t work, or it may be the reason that your IP address has changed.

Someone may ask, what causes the IP address changed?

It is because ITE2 NAS will use assign IP address automatically, but if device encounter network device or ITE2 NAS reboot, under these two factors, IP address may have a chance to re-assign.

To solve this problem, we only need to set up static IP for ITE2 NAS! Sounds easy, right?

For operation steps, please refer to the following post!

[lwptoc depth=”6″]

Tags: , , , , , ,
Posted inPDM(Power Data Manager) Software

Windows 10 NAS route structure introduction

Windows 10 NAS route structure introduction:

ITE2 Technology Inc. ITE2 NAS adopt Windows 10 OS.

So in the ITE2 NAS PDM interface: File Management can be related to the local drive’s route, like [Local Disk: C] corresponds to [System Drive]; [Local Disk: D] correspond to [Main Space]; [Local Disk: E, F, G…] correspond to [Share Folder in Partition Drive].

In the following post, we will introduce each drive and it correspond relationship.

[lwptoc depth=”1″ numeration=”none”]

Tags: , , , , ,
Posted inAdvanced Applications NAS Q&A PDM(Power Data Manager)

System Backup & Restore on Windows 10 NAS

When we are operating our Windows 10 NAS, if we want to reset system due to system display abnormal or slow, we can use the PDM interface system backup function.

Create a system backup first then restore the system if you need on the Windows 10 NAS desktop.

Moreover, system backup function can also restore all the PDM users and groups to the backup timing status.

So we highly recommend that Windows 10 NAS user should do the system backup after creating all the users and groups to avoid any system data loss.

For more information, please refer to the following system backup and restore introduction.

[lwptoc depth=”2″]

 

Tags: , , , , , ,
Posted inAbout ITE2 NAS Base Concepts NAS Q&A

Increase Windows 10 NAS Partition Capacity

Once we created the space for Windows 10 NAS, we can create more than one partition for our NAS. You surely can increase those partition capacity too.

You can directly view the local disk part in the Windows 10 OS interface.

If you like to upgrade the capacity, you can use the [Increase partition capacity] function in the PDM HDD Management.

Please see the following introduction for more information.

Tags: , , , , , ,
Posted inAdvanced Applications NAS Q&A PDM(Power Data Manager)

Reinstall PDM software on Windows 10 OS

After Reset ITE2 NE-201 Windows 10 OS. In this step, we have to reinstall PDM environment software.

Please go to http://start.ite2nas.com/file/ResetEnvRecovery.ppkg download and install software: ResetEnvRecovery.

(NOTE: This software need to take three steps to install: .NET Core SDK 1.0.4, .NET Core 1.1.2 – Runtime, and Intel® Rapid Storage Technology).

[lwptoc depth=”2″]

Tags: , ,